SHUTTING OFF YOUR WATER PIPE

Shutting Off Your Water Pipe

Shutting Off Your Water Pipe

Blog Article

Visit Homepage


Every person seems to have their private rationale when it comes to How to Turn Off the Water in an Emergency.


How to Locate & Turn Off Main Water Shut-Off Valves
The most usual areas a water main will be situated in residence is in your boiler room, basement, or a cut out panel in an area for your house.
Once you find the water pipe you will just turn the shutoff clockwise to close all the water off in your home until you have actually completed the repair. Some residences will certainly have a ball shutoff with a bar that you can pull instead of resort to shut the water off.
If you try to close the water off to your fixtures by using an angle quit and that doesn't function you will need to close of the water main to make your fixing. There are likewise many various other reasons you might require to shut the water pipe like repairing frozen pipelines, fixing leaks, changing components or faucets.
Many individuals are not conscious that they even have a water pipe valve right in their own residence as well as just call a plumber of never ever wind up doing the fixing up until things obtain really negative since they simply do not know that closing the water main is actually simple.

How to Find and Shut Off Main Water Shutoff Valve


Where is the main water shutoff valve located?


This is the million-dollar question. Your main water shutoff valve could be located in several different areas. If you have a home with a basement and crawlspace, it is probably located on an interior wall near the front of the house, where the water comes in from the water meter. In this case, it is most likely hiding in plain sight. If your home was built on a slab, the valve might be located near the hot water heater or inside your garage.


How to Turn Off Main Water Valve


Once you find the shutoff valve you will either hand turn it (clockwise for gate valves and perpendicular to the pipe for ball valves) or use the appropriate tool depending on the design.


If it is located inside your house, it will most likely be a gate or “wheel” valve that you’ll simply turn clockwise to stop the flow of water. Another way to shut off the water is to go to the water meter box. Just be careful not to mess with the city shutoff side of the meter.


Where are the isolation valves?


Isolation shutoff valves are much easier to locate. Most essential home plumbing fixtures have separate valves that control the water flow. Sinks, toilets, water heaters, and washing machines should have a small valve located near the plumbing that can easily shut off the individual water supply.


Simply turning the valve clockwise will turn off the water flow. Sink and toilet problems can be dealt with quickly by simply shutting off the supply this way. It’s always good to test the isolation valves periodically to make sure they are working properly.



Again, once your tighten the water shutoff valves and turn off the water, open up your hot and cold lines to release pressure and test if the water is indeed off.



Make it a priority to locate the water valves in your home – and keep plumbing problems from turning into costly repair situations.

https://happyhiller.com/blog/how-to-find-shut-off-main-water-shutoff-valve/


How to Turn off the Water for Plumbing Repairs

As a person who reads about How to Find and Shut Off Main Water Shutoff Valve, I figured sharing that piece of content was really useful. Are you aware of somebody else who is enthusiastic about the topic? Feel free to share it. We value reading our article about How to Turn off the Water for Plumbing Repairs.



Go Deal

Report this page